Quartet Bracelet

Materials:
SB3-14F: Miyuki 3mm Square Matte Silverlined Chartreuse - 1 tube
SB3-191F: Miyuki 3mm Square Matte 24kt Gold Plated - 1 tube
SB3-2425F: Miyuki 3mm Square Matte Silverlined Teal - 1 tube
SB3-953: Miyuki 3mm Square 24kt Gold Lined Lt Aqua - 1 tube
15-2405F: Miyuki 15/0 Seed Bead Matte Transparent Teal - 1 tube
CF012.10 CLR: C-Flex 49-Strand Beading Wire .012 Grey - 4 feet
190-302-G: Gold-Filled 2x2mm Crimp - 8 pieces
192-524-G: Gold Plated 6mm End Cap - 2 pieces
194-505-G: Gold Plated Ball Toggle - 1 set
192-533-G: Gold Plated 2 inch 22g. Headpin - 2 pieces


Download a pdf of this project to read on your computer or tablet.


Quartet Bracelet Instructions

1. Cut four 12 inch pieces of C-Flex .012 Grey beading wire. Fold a piece of tape over the end of each piece of C-Flex.

Quartet Bracelet Instructions

2. String one Miyuki 3mm Square Bead (SB3) and one Miyuki 15/0 seed bead in a repeating pattern.

Quartet Bracelet Instructions

3. Continue in this way, ending with an SB3 until there are approximately six inches of beads.

Quartet Bracelet Instructions

4. Repeat steps 2 and 3 with the other three colors of SB3 beads.

Quartet Bracelet Instructions

5. Cut the flat end off a 2 inch headpin.

Quartet Bracelet Instructions

6. Make a wire wrapped loop at the end of the headpin.

Quartet Bracelet Instructions

7. String a 2x2mm crimp bead onto the C-Flex. Visit our page on crimping for more detailed instructions.

Quartet Bracelet Instructions

8. Pass the C-Flex through the wire wrapped loop.

Quartet Bracelet Instructions

9. Pass the C-Flex back through the crimp bead and several SB3 and 15/0 beads. Exit an SB3 bead.

Quartet Bracelet Instructions

10. Flatten the crimp bead with a pair of chain nose pliers.

Quartet Bracelet Instructions

11. Trim excess C-Flex.

Quartet Bracelet Instructions

12. Repeat steps 5-11 on the other end of the strand. Make sure that there is no C-Flex showing.

Quartet Bracelet Instructions

13. Repeat with the remaining three strands.

Quartet Bracelet Instructions

14. Slide the bead cap onto the headpin.

Quartet Bracelet Instructions

15. Hold the headpin with a pair of chain nose pliers and bend 90 degrees.

Quartet Bracelet Instructions

16. Use a pair of round nose pliers to form a loop with the headpin.

Quartet Bracelet Instructions

17. Slide the clasp onto the loop.

Quartet Bracelet Instructions

18. Coil the headpin to close the loop and secure the clasp.

Quartet Bracelet Instructions

19. Repeat steps 14-18 to attach the other end of the clasp.

Quartet Bracelet Instructions

20. This pattern will make a finished bracelet approximately 7.75 inches long.


Quartet Bracelet Instructions


Aria
Quartet Bracelet Aria

Materials:
SB3-190F: Miyuki 3mm Square Matte Nickel Plated - 1 tube
SB3-242: Miyuki 3mm Square Sparkle Pewter Lined Crystal - 1 tube
SB3-250: Miyuki 3mm Square Crystal AB - 1 tube
SB3-961: Miyuki 3mm Square Bright Sterling Plated - 1 tube
15-528: Miyuki 15/0 White Pearl Ceylon Seed Bead - 1 tube
CF012.10 CLR: C-Flex 49-Strand Beading Wire .012 Grey - 4 feet
190-302-S: Sterling Silver 2x2mm Crimp - 8 pieces
192-524-S: Silver Plated 6mm End Cap - 2 pieces
194-505-S: Silver Plated Ball Toggle - 1 set
192-533-S: Silver Plated 2 inch 22g. Headpin - 2 pieces


Baroque
Quartet Bracelet Baroque

Materials:
SB3-2035: Miyuki 3mm Matte Metallic Khaki Iris - 1 tube
SB3-2604: Miyuki 3mm Square Sparkle Celery Lined Crystal - 1 tube
SB3-26F: Miyuki 3mm Square Matte Silverlined Olive - 1 tube
SB3-457: Miyuki 3mm Square Metallic Dark Bronze - 1 tube
15-460: Miyuki 15/0 Seed Bead Metallic Dark Raspberry - 1 tube
CF012.10 CLR: C-Flex 49-Strand Beading Wire .012 Grey - 4 feet
192-536-AB: Antique Brass 2x2mm Crimp - 8 pieces
192-524-AB: Antique Brass 6mm End Cap - 2 pieces
194-505-AB: Antique Brass Ball Toggle - 1 set
192-533-AB: Antique Brass 2 inch 22g. Headpin - 2 pieces


Bolero
Quartet Bracelet Bolero

Materials:
SB3-133: Miyuki 3mm Square Transparent Topaz - 1 tube
SB3-199: Miyuki 3mm Square 24kt Gold Iris - 1 tube
SB3-2603: Miyuki 3mm Square Sparkle Rose Lined Crystal - 1 tube
SB3-6F: Miyuki 3mm Square Matte Silverlined Yellow - 1 tube
15-4266: Miyuki 15/0 Seed Bead Silverlined Dyed Hibiscus - 1 tube
CF012.10 CLR: C-Flex 49-Strand Beading Wire .012 Grey - 4 feet
190-302-G: Gold-Filled 2x2mm Crimp - 8 pieces
192-524-G: Gold Plated 6mm End Cap - 2 pieces
194-505-G: Gold Plated Ball Toggle - 1 set
192-533-G: Gold Plated 2 inch 22g. Headpin - 2 pieces


Concerto
Quartet Bracelet Concerto

Materials:
SB3-14F: Miyuki 3mm Square Matte Silverlined Chartreuse - 1 tube
SB3-191F: Miyuki 3mm Square Matte 24kt Gold Plated - 1 tube
SB3-2425F: Miyuki 3mm Square Matte Silverlined Teal - 1 tube
SB3-953: Miyuki 3mm Square 24kt Gold Lined Lt Aqua - 1 tube
15-2405F: Miyuki 15/0 Seed Bead Matte Transparent Teal - 1 tube
CF012.10 CLR: C-Flex 49-Strand Beading Wire .012 Grey - 4 feet
190-302-G: Gold-Filled 2x2mm Crimp - 8 pieces
192-524-G: Gold Plated 6mm End Cap - 2 pieces
194-505-G: Gold Plated Ball Toggle - 1 set
192-533-G: Gold Plated 2 inch 22g. Headpin - 2 pieces


Crescendo
Quartet Bracelet Crescendo

Materials:
SB3-141F: Miyuki 3mm Square Matte Transparent Ruby - 1 tube
SB3-193: Miyuki 3mm Square 24kt Light Gold Plated - 1 tube
SB3-2422F: Miyuki 3mm Square Matte Silverlined Topaz - 1 tube
SB3-462: Miyuki 3mm Square Metallic Gold Iris - 1 tube
15-1434: Miyuki 15/0 Seed Bead Dyed Silverlined Dark Burn Orange - 1 tube
CF012.10 CLR: C-Flex 49-Strand Beading Wire .012 Grey - 4 feet
190-302-G: Gold-Filled 2x2mm Crimp - 8 pieces
192-524-G: Gold Plated 6mm End Cap - 2 pieces
194-505-G: Gold Plated Ball Toggle - 1 set
192-533-G: Gold Plated 2 inch 22g. Headpin - 2 pieces


Minuet
Quartet Bracelet Minuet

Materials:
SB3-12F: Miyuki 3mm Square Matte Silverlined Smoky Amethyst - 1 tube
SB3-155: Miyuki 3mm Square Transparent Lt Tea Rose - 1 tube
SB3-193F: Miyuki 3mm Square Matte 24kt Light Gold Plated - 1 tube
SB3-2405: Miyuki 3mm Square Transparent Teal - 1 tube
15-279: Miyuki 15/0 Seed Bead Marine Blue Lined Crystal AB - 1 tube
CF012.10 CLR: C-Flex 49-Strand Beading Wire .012 Grey - 4 feet
192-536-AB: Antique Brass 2x2mm Crimp - 8 pieces
192-524-AB: Antique Brass 6mm End Cap - 2 pieces
194-505-AB: Antique Brass Ball Toggle - 1 set
192-533-AB: Antique Brass 2 inch 22g. Headpin - 2 pieces


Nocturne
Quartet Bracelet Nocturne

Materials:
SB3-151F: Miyuki 3mm Square Matte Transparent Cobalt - 1 tube
SB3-190: Miyuki 3mm Square Nickel Plated - 1 tube
SB3-401: Miyuki 3mm Square Black - 1 tube
SB3-455: Miyuki 3mm Square Metallic Variegated Blue Iris - 1 tube
15-2440: Miyuki 15/0 Seed Bead Transparent Gray Rainbow Luster - 1 tube
CF012.10 CLR: C-Flex 49-Strand Beading Wire .012 Grey - 4 feet
190-302-S: Sterling Silver 2x2mm Crimp - 8 pieces
192-524-S: Silver Plated 6mm End Cap - 2 pieces
194-505-S: Silver Plated Ball Toggle - 1 set
192-533-S: Silver Plated 2 inch 22g. Headpin - 2 pieces


Sonata
Quartet Bracelet Sonata

Materials:
SB3-134: Miyuki 3mm Square Transparent Dark Topaz - 1 tube
SB3-401FR: Miyuki 3mm Square Matte Black AB - 1 tube
SB3-458: Miyuki 3mm Square Metallic Brown Iris - 1 tube
SB3-978: Miyuki 3mm Square Copper Lined Pale Amethyst - 1 tube
15-4245: Miyuki 15/0 Seed Bead Duracoat Silverlined Dyed Nutmeg - 1 tube
CF012.10 CLR: C-Flex 49-Strand Beading Wire .012 Grey - 4 feet
192-536-AC: Antique Copper 2x2mm Crimp - 8 pieces
192-524-AC: Antique Copper 6mm End Cap - 2 pieces
194-505-AC: Antique Copper Ball Toggle - 1 set
192-533-AC: Antique Copper 2 inch 22g. Headpin - 2 pieces