Materials:
BB-596: Miyuki Berry Bead Opaque Tea Rose Luster - 1 tube
RN-0600-BO: 20mm Bone Ring - 5 pieces
286-827: Swarovski 6mm Round Pacific Opal - 7 pieces
29-0824: Swarovski 8mm Crystal Pearl Platinum - 6 pieces
CF015.10 CLR: C-Flex Beading Wire .015 Grey - 3 feet
190-302-S: Sterling Silver 2x2mm Crimp - 2 pieces
192-537-AS: Antique Silver 4mm Crimp Cover - 2 pieces
CH0004-AS: Antique Silver 3x4mm Flat Cable Chain - 12 inches
192-512-AS: Antique Silver 6mm Jump Ring - 2 pieces
192-535-AS: Antique Silver Lobster Claw - 1 piece
Download a pdf of this project to read on your computer or tablet
1. Cut two 18 inch pieces of C-Flex .015 beading wire.
2. Fold a piece of tape across both strands of C-Flex approximately 3 inches from one end.
3. Holding both strands of C-Flex together, string one Swarovski 6mm crystal round bead and one Swarovski 8mm crystal pearl.
4. Separate the two strands of C-Flex and string six Miyuki Berry beads (BB) onto each one.
5. Push the BB up towards the crystal beads.
6. Pass one strand through the center of a 20mm bone ring.
7. Holding the strands together, string one 6mm crystal.
8. Separate the two strands so that one passes in front and one behind the ring.
9. String six BB onto each strand.
10. Holding the strands together string one 8mm pearl.
11. Repeat steps 4-10.
12. Repeat steps 4-10 until there are five rings in total. String one 6mm crystal after the last 8mm pearl.
13. Cut two 5.75 inch pieces of cable chain. Once attached to the beaded portion, this will form a necklace with a finished length of 21 inches.
14. Holding both strands together string one 2mm crimp bead.
15. Pass the strands through the bottom link of chain and back through the crimp and 6mm crystal.
16. Using a pair of chain nose pliers flatten the crimp.
17. Using a pair of side cutters trim excess C-Flex.
18. Slide a crimp cover over the crimp bead.
19. Use a pair of chain nose pliers to gently close the crimp cover over the crimp bead.
20. Repeat steps 14-19 on the other end of the necklace. Be sure to take up any slack in the beading wire before the second crimp bead is flattened.
21. Attach the lobster claw clasp and jump rings to the end of the chain.
Avatar
Materials:
BB-1529: Miyuki Berry Bead Sparklin Sky Blue Lined Crystal - 1 tube
RN-0600-BH: 20mm Burnt Horn Ring - 5 pieces
286-505: Swarovski 6mm Round Aquamarine - 7 pieces
29-0854: Swarovski 8mm Crystal Pearl Iridescent Lt Blue - 6 pieces
CF015.10 CLR: C-Flex Beading Wire .015 Grey - 3 feet
192-536-AB: Antique Brass 2x2mm Crimp - 2 pieces
192-537-AB: Antique Brass 4mm Crimp Cover - 2 pieces
CH0004-AB: Antique Brass 3x4mm Flat Cable Chain - 12 inches
192-512-AB: Antique Brass 6mm Jump Ring - 2 pieces
192-535-AB: Antique Brass Lobster Claw - 1 piece
Galactic
Materials:
BB-401F: Miyuki Berry Bead Matte Black - 1 tube
RN-0600-BK: 20mm Black Horn Ring - 5 pieces
286-637: Swarovski 6mm Round Jet Hematite 2X - 7 pieces
29-0801: Swarovski 8mm Crystal Pearl Black - 6 pieces
CF015.10 CLR: C-Flex Beading Wire .015 Grey - 3 feet
192-536-GM: Gunmetal 2x2mm Crimp - 2 pieces
192-537-GM: Gunmetal 4mm Crimp Cover - 2 pieces
CH0004-GM: Gunmetal 3x4mm Flat Cable Chain - 12 inches
192-512-GM: Gunmetal 6mm Jump Ring - 2 pieces
192-535-GM: Gunmetal Lobster Claw - 1 piece
Intersteller
Materials:
BB-462: Miyuki Berry Bead Metallic Gold Iris - 1 tube
RN-0600-R: 20mm Red Horn Ring - 5 pieces
286-786: Swarovski 6mm Round Topaz AB - 7 pieces
29-0802: Swarovski 8mm Crystal Pearl Bordeaux - 6 pieces
CF015.10 CLR: C-Flex Beading Wire .015 Grey - 3 feet
190-302-G: Gold Filled 2x2mm Crimp - 2 pieces
192-537-G: Gold Plated 4mm Crimp Cover - 2 pieces
CH0004-G: Gold Plated 3x4mm Flat Cable Chain - 12 inches
192-512-G: Gold Plated 6mm Jump Ring - 2 pieces
192-535-G: Gold Plated Lobster Claw - 1 piece
Moonbeam
Materials:
BB-1528: Miyuki Berry Bead Sparkling Aqua Green Lined Crystal - 1 tube
RN-0600-BO: 20mm Bone Ring - 5 pieces
286-525: Swarovski 6mm Round Blue Zircon - 7 pieces
29-0830: Swarovski 8mm Crystal Pearl White - 6 pieces
CF015.10 CLR: C-Flex Beading Wire .015 Grey - 3 feet
190-302-S: Sterling Silver 2x2mm Crimp - 2 pieces
192-537-S: Silver Plated 4mm Crimp Cover - 2 pieces
CH0004-S: Silver Plated 3x4mm Flat Cable Chain - 12 inches
192-512-S: Silver Plated 6mm Jump Ring - 2 pieces
192-535-S: Silver Plated Lobster Claw - 1 piece
Multiverse
Materials:
BB-596: Miyuki Berry Bead Opaque Tea Rose Luster - 1 tube
RN-0600-BO: 20mm Bone Ring - 5 pieces
286-827: Swarovski 6mm Round Pacific Opal - 7 pieces
29-0824: Swarovski 8mm Crystal Pearl Platinum - 6 pieces
CF015.10 CLR: C-Flex Beading Wire .015 Grey - 3 feet
190-302-S: Sterling Silver 2x2mm Crimp - 2 pieces
192-537-AS: Antique Silver 4mm Crimp Cover - 2 pieces
CH0004-AS: Antique Silver 3x4mm Flat Cable Chain - 12 inches
192-512-AS: Antique Silver 6mm Jump Ring - 2 pieces
192-535-AS: Antique Silver Lobster Claw - 1 piece
Nebula
Materials:
BB-2441: Miyuki Berry Bead Cinnamon Gold Luster - 1 tube
RN-0600-ABO: 20mm Antique Bone Ring - 5 pieces
286-591: Swarovski 6mm Round Fuchsia AB - 7 pieces
29-0833: Swarovski 8mm Crystal Pearl Vintage Gold - 6 pieces
CF015.10 CLR: C-Flex Beading Wire .015 Grey - 3 feet
192-536-AC: Antique Copper 2x2mm Crimp - 2 pieces
192-537-AC: Antique Copper 4mm Crimp Cover - 2 pieces
CH0004-AC: Antique Copper 3x4mm Flat Cable Chain - 12 inches
192-512-AC: Antique Copper 6mm Jump Ring - 2 pieces
192-535-AC: Antique Copper Lobster Claw - 1 piece